Frigoline Production







Evaporators

Evaporators

Cold room evaporators can respond to small, medium and large cooling demands in all capacity ranges. The batteries included in the units are highly efficient in terms of heat and at the same time are compactly designed. Special models are available for project specific needs.

It is manufactured with electrostatic white painted galvanized sheet against corrosion and exhibits a decorative feature as well as its durability. However, the side covers and drain pan are designed to be easily removable for installation and maintenance work. It can be produced with stainless material and epoxy battery upon special request.



  • Battery
  • Cassette
  • Fan
  • Defrost
  • Options
  • Mold geometry: 32 mm x 28 mm
  • Copper pipes Ø 3/8 ″
  • V-type aluminum fin
  • Lamella distance is designed as 6 mm.
  • The input - output collector material is copper.
  • Maximum permissible operating pressure Ps = 21 Bar.
  • Staggered pipe array.
  • Coolers Design suitable for working with R404A, R507C, R22, R134A, R407C refrigerants.
  • Refrigerant distributor.
  • It is painted electrostatic RAL 9016 on galvanized steel.
  • Optional stainless cassette option.
  • Removable side covers.
  • Hinged / Folding drain pan is standard on all models.
  • Intermediate drain pan.
  • Cooler options with different fan diameters and number of fans according to room sizes.
  • Optional selections must be confirmed by Buzçelik Technical Expert.
  • Standard or low noise maintenance-free fan option.
  • Optional AC or EC fan motor options.
  • Protection class IP54, fan construction insulation material class F.
  • Optionally selectable fan accessory types (Axicool fans, FlowGrid noise reducers, etc.)
  • Working range is -40 ° C / + 50 ° C.
  • B1 Defrost system is for the application range at 0 ° C / + 5 ° C room temperature. Defrost heaters are only mounted on the battery.
  • B2 Defrost system is for -34 ° C / 0 ° C room temperature application range. Defrost heaters are mounted on coil and drain pan.
  • Drain line heater, fan hood heater, hot gas defrost system and water defrost system are optional.
  • Defrosting application provides homogeneous heat distribution for fast and efficient defrosting.
  • At higher and equal room temperatures greater than + 4 ° C, optionally, the water defrost option with the cooler design with increased pan depth.
  • Different exterior color.
  • Different pipe wall thickness and pitch.
  • Single phase 220V 1 ~ 50Hz - Three phase 400V 3 ~ 50 Hz fan options.
  • Insulation pan.
  • Stainless steel cabinet.
  • Epoxy paint.
  • Fan cable resistance.
  • Drain line cable resistance
  • Hot gas defrost in the battery and pan.

Have a Question?

0850 441 9019
Get Information


Similar products
More information

Split Refrigeration Units

More information

Industrial Refrigeration Units

More information

Screw Cooling Units