General Specifications

  • Cold room evaporators can meet small, medium and large cooling demands in all capacity ranges. The batteries contained in the units are thermally highly efficient and also are designed compactly. Special models are available for project-specific needs.
  • It is made of galvanized sheet painted with aesthetic electrostatic white paint against corrosion and thus having a decorative feature besides its durability.For all that, the side covers and drain tray are designed to be easily removable for installation and maintenance. It can be produced with stainless material and epoxy battery on special request.
  • Mold geometry : 32 mm x 28 mm
  • Copper pipes Ø 3/8″
  • V-type aluminum lamella
  • It is designed as 6 mm distance between the lamellae.
  • The input – output collector material is copper
  • Maximum operating pressure permitted Ps=21 Bar
  • Staggered tube alignment
  • Suitable cooler operation design with R404A, R507C, R22, R134A, R407C cooler gases
  • Refrigerant distributor
  • Electroplated RAL 9016 is painted on galvanized steel.
  • Optional stainless cassette option.
  • Detachable side covers.
  • Hinged / Folding drain pan is standard for all models.
  • Intermediate drain pan.
  • Cooler options with different fan diameters and numbers according to room sizes.
  • Optional selections must be confirmed by Buzçelik Technical Expert.
  • Standard or low volume maintenance-free fan option.
  • Optional AC or EC fan motor options.
  • Protection class IP54, fan construction insulation material class F.
  • Optionally selectable fan accessories (Axicool fans, FlowGrid noise reducers, etc.)
  • Operating range is -40 °C / +50 °C.
  • B1 Defrost system for application range of 0 °C to + 5 °C room temperature. Defrost heaters are installed only on the battery.
  • B2 Defrost system is available for the application range of -34 °C / 0 °C room temperature. Defrost heaters are mounted to the battery and drain pan.
  • Drain line heater, fan hood heater, hot gas defrost system and wet defrost system are optional.
  • Defrosting application ensures homogeneous heat distribution for fast and efficient defrosting.
  • Water defrost option with cooler design with optionally increased pan depth at room temperatures more than +4 °C.
  • Different exterior cabinet color.
  • Other tube wall thickness and pitch.
  • Single Phase 220V 1 ~ 50Hz – Three Phase 400V 3 ~ 50Hz fan options.
  • Insulated drip tray.
  • Stainless steel cabinet.
  • Epoxy paint.
  • Fan cable resistance.
  • Drainage line cable resistance.
  • Hot gas defrost in battery and pan.
Battery
  • Mold geometry : 32 mm x 28 mm
  • Copper pipes Ø 3/8″
  • V-type aluminum lamella
  • It is designed as 6 mm distance between the lamellae.
  • The input – output collector material is copper
  • Maximum operating pressure permitted Ps=21 Bar
  • Staggered tube alignment
  • Suitable cooler operation design with R404A, R507C, R22, R134A, R407C cooler gases
  • Refrigerant distributor
Casing
  • Electroplated RAL 9016 is painted on galvanized steel.
  • Optional stainless cassette option.
  • Detachable side covers.
  • Hinged / Folding drain pan is standard for all models.
  • Intermediate drain pan.
Fan
  • Cooler options with different fan diameters and numbers according to room sizes.
  • Optional selections must be confirmed by Buzçelik Technical Expert.
  • Standard or low volume maintenance-free fan option.
  • Optional AC or EC fan motor options.
  • Protection class IP54, fan construction insulation material class F.
  • Optionally selectable fan accessories (Axicool fans, FlowGrid noise reducers, etc.)
  • Operating range is -40 °C / +50 °C.
Defrost
  • B1 Defrost system for application range of 0 °C to + 5 °C room temperature. Defrost heaters are installed only on the battery.
  • B2 Defrost system is available for the application range of -34 °C / 0 °C room temperature. Defrost heaters are mounted to the battery and drain pan.
  • Drain line heater, fan hood heater, hot gas defrost system and wet defrost system are optional.
  • Defrosting application ensures homogeneous heat distribution for fast and efficient defrosting.
  • Water defrost option with cooler design with optionally increased pan depth at room temperatures more than +4 °C.
Options
  • Different exterior cabinet color.
  • Other tube wall thickness and pitch.
  • Single Phase 220V 1 ~ 50Hz – Three Phase 400V 3 ~ 50Hz fan options.
  • Insulated drip tray.
  • Stainless steel cabinet.
  • Epoxy paint.
  • Fan cable resistance.
  • Drainage line cable resistance.
  • Hot gas defrost in battery and pan.

QUOTATION REQUEST