General Specifications

  • Industrial and commercial condensers are used in a wide range of fields. The condensers can be designed as ”3/8 and 1/2” copper pipes in high capacity and horizontally or vertically depending on the area of use, in order to maximize the heat transfer efficiency. Non-standard condenser models are available for special projects.
  • The main carrier elements are made of galvanized sheet or aluminum plate, which is resistant to corrosive atmosphere. Optionally, different materials can be used.
  • Mold geometry : 32 mm x 28 mm.
  • Copper pipes Ø 3/8
  • V-type aluminum lamella
  • Spacing between lamellae is 2,1 – 2,5 mm.
  • The input – output collector material is copper.
  • Maximum operating pressure permitted Ps=21 Bar.
  • Staggered tube alignment.
  • Suitable cooler operation design with R404A, R507C, R22, R134A, R407C cooler gases.
  • Delivery with positive pressure.
  • Electroplated RAL 9016 is painted on galvanized steel.
  • Galvanized steel or aluminum plate.
  • The fan compartments are separated from each other with sheet metal plates and thus the reverse rotation effect of standing fans is prevented.
  • Ø500 – Ø630 – Ø800 – Ø350 mm/ 230V ~ 50Hz Single Phase/ 800, 1250 rpm and 400V ~ 50 Hz Three phase 650, 900 rpm fans.
  • Optional selections must be confirmed by Buzçelik Technical Expert.
  • Standard or low volume maintenance-free fan option.
  • Optional AC or EC fan motor options.
  • Protection class IP54, fan construction insulation material class F.
  • Optionally selectable range of fan accessories (FlowGrid noise reducers, etc.)
  • Operating range – 40 °C/ + 50 °C.
  • Different exterior cabinet color.
  • Other tube wall thickness and pitch.
  • Single Phase 220V 1 ~ 50Hz – Three Phase 400V 3 ~ 50Hz fan options.
  • For special products not listed in the catalog, please contact the sales department.
  • Epoxy coated aluminum lamellae.
Battery
  • Mold geometry : 32 mm x 28 mm.
  • Copper pipes Ø 3/8
  • V-type aluminum lamella
  • Spacing between lamellae is 2,1 – 2,5 mm.
  • The input – output collector material is copper.
  • Maximum operating pressure permitted Ps=21 Bar.
  • Staggered tube alignment.
  • Suitable cooler operation design with R404A, R507C, R22, R134A, R407C cooler gases.
  • Delivery with positive pressure.
Casing
  • Electroplated RAL 9016 is painted on galvanized steel.
  • Galvanized steel or aluminum plate.
  • The fan compartments are separated from each other with sheet metal plates and thus the reverse rotation effect of standing fans is prevented.
Fan
  • Ø500 – Ø630 – Ø800 – Ø350 mm/ 230V ~ 50Hz Single Phase/ 800, 1250 rpm and 400V ~ 50 Hz Three phase 650, 900 rpm fans.
  • Optional selections must be confirmed by Buzçelik Technical Expert.
  • Standard or low volume maintenance-free fan option.
  • Optional AC or EC fan motor options.
  • Protection class IP54, fan construction insulation material class F.
  • Optionally selectable range of fan accessories (FlowGrid noise reducers, etc.)
  • Operating range – 40 °C/ + 50 °C.
Options
  • Different exterior cabinet color.
  • Other tube wall thickness and pitch.
  • Single Phase 220V 1 ~ 50Hz – Three Phase 400V 3 ~ 50Hz fan options.
  • For special products not listed in the catalog, please contact the sales department.
  • Epoxy coated aluminum lamellae.

QUOTATION REQUEST